Reviews - Sentey


 
Ultimos Artigos e testes
 
LTP1000-SM by TweakTown
December 1969

 

The LTP1000-SM that we received is one of the best that we have seen to date on top of it all.
The Voltage regulation is within 2% of specification across the board. DC output quality doesn't get much better either unless you are willing to spend quite a bit more for a power supply. Rounding things out as far as performance is concerned is the efficiency of the unit, and it performs at 80 PLUS Platinum levels, just as advertised. Sentey is bringing the unit to the market at a nice price point too, and when combined with the slighter longer warranty than most offer, it should be a winner.
 
LTP1000-SM by Ozeros
December 1969

Desde el primer momento, notamos la calidad y preocupación que la marca ha puesto en su producto, puesto que el contenido de su caja, así como el orden son muy buenos, con todo muy ordenado, protegido y sobretodo, con cables fáciles de encontrar.

La fuente en si tiene un rendimiento sorprendente, ya que a pesar que no superó por un margen amplio las especificaciones de la certificación 80 plus platinum, si se mantuvo fantásticamente estable durante todas las pruebas, situación en la cual los cables se llegaron a entibiar, pero no se derritieron ni ablandaron, lo cual habla de la calidad de construcción; Su estabilidad promedio fue de 92%, muy por sobre el promedio de la mayoría de las fuentes del mercado.

Como verán, la fuente al perecer no tiene ningún punto negativo, sin embargo, para poder hacernos de un producto tan bueno como este hay que pagar y es que esta fuente Sentey 1000W Platinum Power Series cuesta cerca de $260 dólares aproximadamente (130.000 CLP), que si bien pueden parecer bastantes, creemos que los vale, dejándola con una excelente relación precio/rendimiento en el competitivo mercado de las fuentes de alto rendimiento.

 
ERP650-SM by Tecnogaming
December 1969

Extremadamente silenciosa, capaz de tolerar consumos sostenidos de mas de 420W la fuente puede tolerar configuraciones SLI de placas intermedias incluso cuando no se anuncia oficialmente en la caja.  Con una temperatura de operación muy aceptable sin dudas lo que mas destaca de este producto es su gran estabilidad y silencio en operación, una lína de 12V extremadamente estable y una construcción muy sólida.  Sin lugar a dudas, estabilidad, silencio y solidez de construcción son 3 características de mucho calibre y le hacen merecedor a este producto de nuestro Editor’s Choice.

 
LTP1000-SM by Madbox PC
December 1969

Sentey nos entrega un excelente producto, siendo este uno con la mayor eficiencia que hemos visto, esta muy bien diseñada y se nota el esfuerzo que pone Sentey para posicionarse como una de las mejores alternativas del mercado tanto por precio como por rendimiento. ¿ Cambiaríamos algo en este producto? Si, nos hubiese gustado que en vez de los conectores Crystal, nos hubiesen entregado algo menos lindo, pero más durable. ¿Compraría o recomendaría esta fuente? Totalmente! la Sentey Platinum 1000W LTP1000-SM demostró ser una opción seria, competitiva y totalmente peligrosa para otras marcas que se fían más del marketing que de sus productos. Dependiendo de su precio de entrada, pondría en serios riesgos a fuentes con la misma cantidad de watts, pero certificaciones menores, por lo demás es una fuente de excelente calidad y grandes prestaciones. .

 
Halcon II GS-6050 by Hardware Secrets
December 1969

The Sentey Halcon GS-6050 II brings several nice features for a case in its price range, but it also brings a few weak points that may bother some users. In summary, it is an excellent case if you like all the options it brings and don’t mind its weaknesses. Otherwise, you should look for a different product. Strong Points Mechanism for hiding the front face of the main optical drive Vented covers with air filters for two of the external 5.25” bays and for the external 3.5” bay Air filter for the front, bottom, and power supply fans Individual mechanisms for fastening expansion cards Comes with six 120 mm fans Fan for cooling down the main storage device The internal 3.5”/2.5” bays are aluminum-made A huge hole in the motherboard tray for accessing the backplate of the CPU cooler Holes for routing cables behind the motherboard tray A few clips for fastening cables .

 
Halcon II GS-6050 by Clube do Hardware
September 2012

O Sentey Halcon GS-6050 II oferece vários pontos positivos para um gabinete  na sua faixa de preço. No entanto, ele também apresenta alguns pontos fracos que podem desapontar alguns usuários. Em resumo, ele é um gabinete excelente se você apreciar suas qualidades e não se incomodar com seus pontos fracos. Caso contrário, melhor procurar por um outro produto.

Pontos Fortes

    Mecanismo para cobrir a parte frontal da unidade óptica principal
    Tampa perfurada com filtros de ar para duas das baias externas de 5,25”e para a baia externa de 3,5”
    Filtro de ar para as ventoinhas dos painéis frontal, inferior e da fonte de alimentação
    Mecanismos individuais para a instalação de placas de expansão
    Apresenta seis ventoinhas de 120 mm
    Ventoinha para refrigeração da unidade de armazenamento principal
    As baias internas de 3,5”/2,5” são feitas de alumínio
    Abertura na bandeja da placa-mãe  para você ter acesso ao mecanismo de retenção do cooler do processador
    Furos para você passar cabos por trás da bandeja da placa-mãe
    Vários clipes para prender cabos

 
Abaddom II GS-6070 by Tweaktown
September 2012

Speaking of the fans and furthermore, the fan controllers. I was really pleased with this part of the chassis. With seven fans running full blast in the chassis along with the fan on the video card, the chassis is really silent. The fan controller only covers two fans in the chassis, but you get to choose which, as long as they are Molex powered like the ones around the chassis. I chose to connect the HDD fan and the front fan for testing purposes and the reaction from the fans to the dial is fast and accurate. In the build you've just seen, I would not have been able to install a 120mm or an 80mm fan on the floor due to the length of the PSU. Furthermore, even with a shorter PSU installed, the wiring would still interfere with the fan as this is really the only place to route extra wiring and make the connection to the PSU from all of the various components.

 
Halcon II GS-6050 by Legit Reviews
August 2012

Like most mid tower chassis', the Sentey GS-6050 II is  sturdy, light weight chassis that has a small foot print. Anyone that wants or needs a computer to be portable the will find the Sentey GS-6050 II chassis easily accommodating. This chassis also comes with all of the fans included, so that we do not have to purchase any extra fans.

The Sentey GS-6050 II has a tool-less design that makes installing computer hardware easy regardless of the level of expertise one has when it comes to working with computers. Another area I feel that makes this little chassis shine is the inclusion of being able to mount both 3.5" and 2.5" HDD/SSDs directly with out the need of special 2.5" to 3.5" HDD adapters; which, saves on installation confusion, and on money from having to purchase the adapters. You also have a single SuperSpeed USB 3.0 port on the front panel, which is nice if you are using a current mainstream platform as that is a standard feature now.

 
Optimus II GS-6000 by KitGuru
August 2012

The Sentey GS6000 II Optimus Mid Tower has been released to target the budget gaming audience who don’t have a lot of capital to work with. The appearance is very appealing, especially considering the modest price point. There are some clever design decisions, although the company could have improved some areas to make the GS-6000 II Optimus a more tempting proposition. The chassis is spacious inside and there is plenty of room to install components, even with a full sized ATX motherboard in the mix. The tool free, expansion and ODD/HDD bays are a nice touch and will help improve the installation phase. Sadly, the largest graphics cards will not fit, although as shown earlier, AMD’s HD6950 just made it in.

 
Optimus II GS-6000 by Benchmarck Reviews
August 2012

In terms of functionality, the Sentey GS-6000 II Optimus has a lot of what we are looking for. There is a USB 3.0 port on the front I/O panel, although only one. There is another USB 2.0 port as well. The front I/O panel also has an SD/MMC card reader. That's a nice feature that a lot cases don't go to the trouble to include. The Sentey GS-6000 II Optimus includes a fan controller for the two fans that come with the case. In my opinion, this is one of the best features, and one I hope other manufacturers start to emulate. The GS-6000 II Optimus has holes for water cooling hoses, and a little space up at the top for a reservoir. It does have plenty of space next to the PSU on the bottom for a radiator and reservoir though. Overall, for the price, the functionality of the Sentey GS-6000 II Optimus is pretty impressive.